MEPIPSETUP:   "MEPIPSETUP" " "
LAYDMLST:   "LAYDMLST" "List of valid MEP layout dimensions related to the field MepHea.LayoutDim."
MEPDAT:   "MEPDAT" "Information specific to one MEP-measurement of corresponding electrode configuration (P1, P2, C1 and C2) and apparent resistivity (Rhoa). The focus depth can substitute (P1, P2, C1 og C2)."
MEPPULSE:   "MEPPULSE" "Description of pulses for each waveform."
MEPWAVE:   "MEPWAVE" "Waveforms for DC/IP-measurements."
MEPFILT:   "MEPFILT" "Filters applied to DC/IP-measurements."
MEPIPDAT:   "MEPIPDAT" " "
MEPLYOUT:   "MEPLYOUT" "The coordinates and elevations of each electrode/connector in a MEP-profile. The electrodes/connectors are numbered sequentially along the profile"
MEPSETDA:   "MEPSETDA" "Type/value-pairs of settings applied to a MEP-measurement"
MSETYLST:   "MSETYLST" "List of valid setting types in the MepSetDa table."
MEPHEA:   "MEPHEA" "Information specific to a multi electrode profile (MEP). Cables are laid out along a profile and electrodes are connected with constant spacing. All electrodes are numbered. Each MEP measurement should reference four electrode positions in the MEP layout"
MEPSET:   "MEPSET" "List of settings applied to a MEP-measurement"
LAYTYLST:   "LAYTYLST" "List of valid MEP layout types related to the field MepHea.LayoutType."


PACESHEA:   "PACESHEA" "Information specific for a Pulled Array Continuous Electrical Sounding (PACES) profile. One profile can have breaks and be discontinuous. The PACES data are processed (filtered and shifted) to form soundings"
PAFIL:   "PAFIL" "Information about the binary raw data files from the PACES instrument"
PCSTYLST:   "PCSTYLST" "List of valid setting types in the PaChaSet table."
PFSTYLST:   "PFSTYLST" "List of valid setting types in the PaFilSet table."
PACESPOS:   "PACESPOS" "Information specific to a PACES sounding. A sounding is made up of data from all channels available. The particular datum for each channel is chosen so that their lateral focus points are at the same position at the profile"
PAFILSET:   "PAFILSET" "Type/value-pairs of settings for the PACES instrument (information from then file-header for version 2 files and later)"
PACESDAT:   "PACESDAT" "Information specific to one PACES measurement of corresponding Channel and Rhoa. The focus depth can substitute channel."
PACESCHA:   "PACESCHA" "Information specific to the electrode configurations used in a PACES-profile"
PACHASET:   "PACHASET" "Type/value-pairs of settings applied to a Channel in a PACES-profile"
PAPRO:   "PAPRO" "The different profiles a PACES-dataset is divided into"


MOEDITION:   "MOEDITION" "Information related to a Model Edition. A Model Edition is a collection of models with identical inversion setup, e.g., ModSubType, model parametrization and use of a priori information"
MOEDITIONSET:   "MOEDITIONSET" "Type/value pairs of settings applied to a MoEdition. The table will typically contain settings for inversion setup"
MODSUBTYPLST:   "MODSUBTYPLST" "List of valid types of ModSubTypes related to the field MoEdition.ModSubType"
MODSETTYPLST:   "MODSETTYPLST" "List of valid setting types in the MoEditionSet table"


LOGCURVEINSTRUMENT:   "LOGCURVEINSTRUMENT" "Information about the logging tool(s) used for a given curve"
LOGCURVE:   "LOGCURVE" "Information specific for a log curve in the dataset."
LOGDATA:   "LOGDATA" "The specific log data values of a given log in the LogCurve-table."
LOGHEA:   "LOGHEA" "Information specific for borehole logging dataset, which is confined to one logging sequence reported in one LAS-file. If the logging have taken place in more than one string in a developed borehole logs from each string make up separate log datasets. If the development of the well change under the logging campaign logs from each step of the development form individual Log-dataset."
LOGPROPERTY:   "LOGPROPERTY" "The LogProperty table contains information about the borehole or developed well. The information is stored in Key, Value pairs. "


HEISYLST:   "HEISYLST" "List of valid types of height systems related to the field HeightSys."
SWLST:   "SWLST" "List of the specific software version that are used either in the data processing process or the model construction process"
PROJECT:   "PROJECT" "Project or campain in which the dataset is recorded"
DSETSW:   "DSETSW" "Identification of the specific software version that are used in the data processing process"
DSETYLST:   "DSETYLST" "List of valid dataset types related to the field Dataset.DatasetTyp."
GEITYLST:   "GEITYLST" "List of instrument-types"
PROJPURP:   "PROJPURP" "The purpose(s) of a project"
GEINSLST:   "GEINSLST" "List of individual instruments (transmitterinstruments, receiverinstruments, cables, switchboxes, receivercoils, etc.)"
SWTYLST:   "SWTYLST" "List of software types that are used either in the data processing process or the model construction process"
PARTY:   "PARTY" "The parties that may be involved in a project. Names and adresses of client, contractor, etc."
DSETGEIN:   "DSETGEIN" "The instruments that were used in a dataset"
SETUNLST:   "SETUNLST" "List of valid setting units in the PaChaSet, PaFilSet, MepSetDa, TemSeSet, ODVPoSet, ODVLaSet, and TDVMoSet tables."
DATYLST:   "DATYLST" " "
PROJREGI:   "PROJREGI" "The region(s) covered by a project"
DATASET:   "DATASET" "A dataset corresponds to one Wenner-profile, one Schlumberger-sounding, one PACES-profile, etc.. General information applicable to all datatypes. The "header-tables" (WENNHEA, SCHLUHEA, etc.) store information specific to the specific datatype used"


SCHLUHEA:   "SCHLUHEA" "Information specific to a Schlumberger-sounding"
SCHLUSEG:   "SCHLUSEG" "Information specific to a Schlumberger-segment (all measurements with one specific value of potential electrode distance A)"
SCHLUDAT:   "SCHLUDAT" "Information specific to one measurement of corresponding electrode configuration (LHalf) and apparent resistivity (Rhoa). Focus-depth can substitute LHalf"


ZTYPELST:   "ZTYPELST" "List of valid types of z-coordinates in a 2DV model. The list is related to the field TwoDVMod.ZType."
ODVMEPPO:   "ODVMEPPO" "Table setting up a dataset position (used in ODVDSEP table) for a MEP dataset by combining MEP data to form a sounding interpreted as a 1D model."
ODVFWRESTIMESERIES:   "ODVFWRESTIMESERIES" "Table containing the forward response of the 1D vertical model and the measured data if they are expressed as timeseries.The response values (OrdiResValTime for real part and OrdiResValTime2 for imaginary part) and the measured data values (OrdiMeaValTime and OrdiMeaValTime) are given with respect to a time related parameter (AbsciValTime)."
ODVMEPDA:   "ODVMEPDA" "Table listing MEPdata sequences, that form the sounding given a dataset position in the ODVDSEP table."
ODVDOIDEPTH:   "ODVDOIDEPTH" "The table contains the Frechet sensitivity values as a function of depth below the surface. The values are always absolute."
MODSW:   "MODSW" "Identification of the specific software version that are used in the model construction process"
TSSTYLST:   "TSSTYLST" "List of valid setting types in the TemSeSet table."
ODVMODSE:   "ODVMODSE" "Table coupling the model and the interpreted dataset."
ODVPDSEP:   "ODVPDSEP" "Table coupling the model position and the dataset postion. The dataset positions should be existing positions of e.g. a PACES or TEM profile."
ONEDVMOD:   "ONEDVMOD" "Information specific to a 1D vertical geophysical model. The 1DV model branch of the model structure can consist of a single 1D model or a collection of 1D models with different locations (positions). E.g. located side by side forming a profile."
ODVLASET:   "ODVLASET" "Type/value pairs of settings applied to each layer of the 1D model."
ODVLAYER:   "ODVLAYER" "Information specific to one layer in a 1D vertical geophysical model."
OPSTYLST:   "OPSTYLST" "List of valid setting types in the ODVPoSet table."
ODVSTLST:   "ODVSTLST" "List of valid types of 1D vertical models related to the field OneDVMod.ModSubType."
TDVMOSET:   "TDVMOSET" "Type/value-pairs of settings specific to a 2D vertical model. The table will typically contain modelling software settings."
OLSTYLST:   "OLSTYLST" "List of valid setting types in the ODVLaSet table."
TDVCELL:   "TDVCELL" "Information specific to a cell in a two-dimensional vertical model (profile)."
ODVFWRES:   "ODVFWRES" "Table containing the forward response of the 1D vertical model and the measured data.The response value (OrdiResVal) and the measured data value (OrdiMeaVal) are given with respect to a depth related parameter (AbsciVal) e.g. GateCenterTime or focusdepth"
CONTYLST:   "CONTYLST" "List of valid constraint types related to the field ODVLaCon.ConstrType."
ODVSUPPLLAYERPARAM:   "ODVSUPPLLAYERPARAM" " "
TDVPRPOI:   "TDVPRPOI" "Information specific to the location of the 2D vertical model (profile) given as fixed points. As a minimun the start and end points must be stored."
TWODVMOD:   "TWODVMOD" "Information specific to a two-dimensional vertical model (profile)."
TOPMOLST:   "TOPMOLST" "List of valid value indicating how topography is included in the TDV-model. The list is related to the field TwoDVMod.IsTopoMod."
ODVDOI:   "ODVDOI" "The table contains the Depth og Investigation (DOI) values for the Model/Position. There are two DOI values indicating an upper and a lower limit. The values can be from an absolute or a relative threshold from the curve given in ODVDOIDEPTH table."
ODVFWRPARAMTYPLST:   "ODVFWRPARAMTYPLST" "List of valid types of Absci-and OrdiParam and Absci- and OrdiParamTime in the ODVPDSEP-table."
ODVPOS:   "ODVPOS" "Information specific to one 1D model at a given position."
DISTYLST:   "DISTYLST" "List of valid values indicating how the "distance" is given in a TDV-model. The list is related to the field TwoDVMod.DistancTyp."
ODVSUPPLLAYER:   "ODVSUPPLLAYER" " "
TDVSTLST:   "TDVSTLST" "List of valid types of 2D vertical models related to the field TwoDVMod.ModSubType."
ODVSUPPLLAYERPARAMTYLST:   "ODVSUPPLLAYERPARAMTYLST" "List"
MODEL:   "MODEL" "Information specific to a geophysical model. A model can either be a 1D vertical model or a 2D vertical model. The ONEDVMOD and TWODVMOD tables store information specific to the 1D vertical and 2D vertical model, respectively."
ODVLACON:   "ODVLACON" "Constraints applied to the models layer-boundaries or -resistivities"
TDVMODSE:   "TDVMODSE" "Table coupling the model and the interpreted dataset."
TDVFWRES:   "TDVFWRES" "Table containing the forward response of the 2DV model (profile) and the measured data. The response (OrdiResVal) and the measured data (OrdiMeaVal) value are given with respect to distance and the depth related parameter (AbsciVal), e.g. focusdepth."
ODVPOSET:   "ODVPOSET" "Type/value pairs of settings applied to the entire 1D model at each position. The table will typically contain modelleringsoftware settings."
TSETYLST:   "TSETYLST" "List of valid setting types in the TDVMoSet table."


SKYSEQ:   "SKYSEQ" "The table is the main table for the tables holding raw and processed data."
SKYLINE:   "SKYLINE" "The table contains information on line number and line type."
SKYNAV:   "SKYNAV" "The table contains a list of the individual navigation devices and the data header for their data. For raw data a section has a fixed length but for processed data all data are in one section. The field SKYNAV.DEVICENO relates to SKYDEV.DEVICENO."
SKYSEGWAVE:   "SKYSEGWAVE" "Describes the transmitter waveform in linear segment, if not the fields in the SKYSEG table are used."
SKYSEGSET:   "SKYSEGSET" "A setting table under the SKYSEG table. Currently there are no entries in this table."
SKYLINEPOS:   "SKYLINEPOS" "The table contains information on positions along the line."
SKYSEGFILT:   "SKYSEGFILT" "The table describes the high and low pass filters in the receiver system."
SKYSEQLIST:   "SKYSEQLIST" "The table is a list table, which contains information on flags indicating the data types specific to the SkySeq table"
SKYSEG:   "SKYSEG" "The table contains information about the setup of the equipment."
SKYDAT:   "SKYDAT" "The table describes a lateral section of data. For raw data a section has a fixed length but for processed data all data are in one section. The primary key is DATASET, PROCSEQ, TEMSEGNO, POSITION."
SKYSEGSETLST:   "SKYSEGSETLST" "The table is a list table, which contains type/value pairs of settings specific to the SKYSEG table."
SKYDEVTYPE:   "SKYDEVTYPE" "The table contains information about what navigation devices are attached to the system."
SKYDEV:   "SKYDEV" "The table contains information about the location of each navigation device. The coordinates are relative to the center of the transmitter frame. x is positive in the flight direction and z is positive downwards."
SKYSEGLOOP:   "SKYSEGLOOP" "The table describes corners of the transmitter loop."
SKYPROCDAT:   "SKYPROCDAT" "The table has the processed data. The field SKYPROC.GATENO relates to SKYSEGTIMES.SEQUENCE."
SKYHEA:   "SKYHEA" "The table is the header table for the SkyTEM branch of GERDA. In general all time stamps are in GMT. In general all coordinates are: x-axis positive along the flight direction and the z-axis positive downwards."
SKYDATSEG:   "SKYDATSEG" "The table branches to data from a specific segment number."
SKYSEGTIMES:   "SKYSEGTIMES" "The table describes the gate center times and gate factors."
SKYNAVLIST:   "SKYNAVLIST" "The table is a list table. It is used to store all information about the how data are processed."
SKYNAVDEV:   "SKYNAVDEV" "The table contains a list of the navigation devices. The field SKYNAVDEV.DEVICETYPE relates to SKYDEVTYPE.DEVICETYPE."
SKYDEVTYPELST:   "SKYDEVTYPELST" "The table is a list table, which contains information on flags indicating the device types specific to the SkyDevType table."
SKYPROCSEG:   "SKYPROCSEG" "The table has processed data for one position. The field SKYPROCSEG.TEMSEGNO relates to SKYSEG.TEMSEGNO."
SKYDATLIST:   "SKYDATLIST" "The table is a list table. It is used to store all information about the how data are processed."


TEMPOS:   "TEMPOS" "Information specific to one single TEM-sounding or to one sounding position of a TEM-profile"
TEMSTLST:   "TEMSTLST" "List of valid TEM-subtypes (tem40, patem, hmtem1, etc.)"
TEMFILT:   "TEMFILT" "Filters applied to TEM-measurements. Described by type, cut-off frequency, order and location"
TEMWAVE:   "TEMWAVE" "TX-waveform sampled for ½ period. Timedelay=0 sec at the begin of turn-off ramp. Values in Timedelay and Amplitude are (Timedelay1, Amplitude1), (Timedelay2, Amplitude2), ... Timedelay's are neg. for "turn-on current" part of waveform"
TEMSEG:   "TEMSEG" "Information specific to TEM-measurements with one repetitionfrequency and of a certain type (real data or noise) recorded at a given position"
SEGCOLST:   "SEGCOLST" "List of valid code values of information on coupled data related to the field TemSeg.SegCoupled."
TEMHEA:   "TEMHEA" "Information specific to a profile of Transient Electromagnetic measurements (TEM)."
TEMSESET:   "TEMSESET" "Type/value pairs of settings specific to a TEM segment"
IGNORDAT:   "IGNORDAT" " "


SEIACQUISET:   "SEIACQUISET" "The table is a list table, which contains type/value pairs of settings specific to the SeiAcquiSet table."
SEIVELOMODEL:   "SEIVELOMODEL" "Table containing download link to the sound velocity files associated with the seismic datasets."
SEILINE:   "SEILINE" "Information specific for the seismic line. The seismic line is the actual collected line. A seismic line can be related to more than one dataset (processing). A seismic line is characterized with a name, dates for recording period, data acquisition parameters and acquisition instruments."
SEIHEA:   "SEIHEA" "Information specific for the seismic dataset, which is one processing of a seismic line. The dataset (processing) is related to a seismic line described in the SeiLine-table"
SEICDPPOSITION:   "SEICDPPOSITION" "Information of the CDP positions of the dataset (processeing). The CDP positions are read from the Seg-Y file."
SEIRAWDATAFILE:   "SEIRAWDATAFILE" "Table containing download links to raw data- and navigation files relating to the seismic lines."
SEILINEINSTRUMENT:   "SEILINEINSTRUMENT" "Table containing the instruments and cables used in the seismic dataset."
SEISTACKFILE:   "SEISTACKFILE" "Table containing metadata and download links for the SegY- and associated image files relating to the seismic datasets."


HEMCOILSET:   "HEMCOILSET" "Setting table of Type/Value pairs of settings specific for each channel and valid for all data point in the dataset (survey)."
HEMCOIL:   "HEMCOIL" "The table contains information related to a specific configuration: the frequency, coil separation and coil configuration."
HEMLINE:   "HEMLINE" " "
HEMHEA:   "HEMHEA" "The table is the header table for the HEM branch of GERDA. It contains information that is general for the HEM data. The data transform is given in the fields HEMHea.OrdiParam and HEMHea.OrdiParam2"
HEMDAT:   "HEMDAT" "The table contains information on the measured data"
HEMDATLIST:   "HEMDATLIST" "Setting table of Type/Value pairs of settings specific for eac data point."
HEMCOILTYLST:   "HEMCOILTYLST" "List of valid setting types in the HEMCoilSet-table"
HLTYPLST:   "HLTYPLST" " "
HEMCOILGEOTYLST:   "HEMCOILGEOTYLST" "List of valid codes for the Coil Geometry, CoilGeo in the HEMCoil table."
HEMALT:   "HEMALT" "The table contain information on the altitude devices and the measured altitudes."
HEMDATTYLST:   "HEMDATTYLST" "List of valid setting types in the HEMDatSet-table"
HEMSUBTYLST:   "HEMSUBTYLST" "List of valid codes for the HEMSubType in the HEMHea table."
HEMPOS:   "HEMPOS" "The table contains information related to each position along the data lines."
HALTTYLS:   "HALTTYLS" " "


WENNDAT:   "WENNDAT" "Information specific to one Wenner measurement of corresponding electrode spacing (a) and apparent resistivity (Rhoa). The focus-depth can substitute the electrode spacing"
WENNPOS:   "WENNPOS" "Information specific to a position on a Wenner-profile."
WENNHEA:   "WENNHEA" "Information specific to a Wenner-profile"